Hello, I have recently deployed an 11 site WAAS solution with 512s at all the branches and a 612s at two "central" locations. I am running WAFS and have enabled prepositioning to push out user files to each location.
As I pushed the files, the "preposition status" indicated that the transfer had terminated with the message "Preposition size limit was exceeded."
Is there any way to see the presence of the prepositioned files on the WAE appliance so I can determine which files were successfully transferred?
There is currently no way to display the objects that are prepositioned. However, you can enable the EnhanceDebugging feature in Expert Mode, which will generate more verbose logging for PP -- including the names of the files that are pre-positioned. You can find the parameters on the WAE running the WAFS Edge service:
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...