Hello, I have recently deployed an 11 site WAAS solution with 512s at all the branches and a 612s at two "central" locations. I am running WAFS and have enabled prepositioning to push out user files to each location.
As I pushed the files, the "preposition status" indicated that the transfer had terminated with the message "Preposition size limit was exceeded."
Is there any way to see the presence of the prepositioned files on the WAE appliance so I can determine which files were successfully transferred?
There is currently no way to display the objects that are prepositioned. However, you can enable the EnhanceDebugging feature in Expert Mode, which will generate more verbose logging for PP -- including the names of the files that are pre-positioned. You can find the parameters on the WAE running the WAFS Edge service:
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...