I've setting a lab to test the waas. I've got one central manager and two application-acceleration devices. Everything is configured well using the cisco guide.
Wccp redirection is ok and I have good performance with http and ftp acceleration.
My probleme is that I cannot configure wafs properly the preposition is not working when I start it now (in schedule). I have other problem which is the windows authentication. I setup this and the devices are in active directory shown but the check fail.
I don't know if the two problem have a link.
Please help me to set up the windows authentication correctly and the wafs configuration to let the preposition work.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...