WAAS: reestablish connection after break takes up to one our
in testing environment the time to establish the new optimization takes up one our. We disconnected one wae via shut-down of the redirect-interface. The edge wae is connected directly to the edge-router. WCCP-redirection works but the statistics for wccp traffic on the edge wae are all zero. The window for Statstics of the CM shows no optimization for this connection. We tested with copy of text-file.
Re: WAAS: reestablish connection after break takes up to one our
the connectios statistiks of both wae are zero in the field "% Comp" and the customer can follow this with his applications. But the kind of optimization is displayed (dre, compression) for each connection.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...