we are installing WAAS demo for A customer has two sites are connected via Microsoft site-to-site over internet , and ISA servers terminate the VPN in the two sites (and not working as a firewall) , the WAAS devices are connected inline mode behind the ISA where all traffic coming in and out must pass through the WAE 's , the problem that they don't do any LZ compression or DRE caching ,it just TFO , the default policies are applied and I am sure that the CIFS is enabled on the WAE 's , the most important traffic is Oracle application and it is just TFO optimized although the default policies state full optimization , I even created an explicit policy with highest priority to full optimize the traffic destined to or sourced from the oracle servers and I made sure it transferred to all WAE 's but it didn't work
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...