Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WAAS - TCPDUMP Issue

Hi everyone,

I'm running version 4.1.1d, I'm unable to use the tcpdump/tethereal to perform a pre capture filter on only devices using WCCP GRE, it works fine using WCCP L2. Has anyone ran into this problem?

2 REPLIES
Silver

Re: WAAS - TCPDUMP Issue

Try this configuration.

To dump network traffic, use the tcpdump EXEC command.

tcpdump [LINE]

TCPdump is a utility that allows a user to intercept and capture packets passing through a network interface, making it useful for troubleshooting network applications.

To analyze network traffic from the command line, use the tethereal EXEC command.

tethereal [LINE]

Tethereal is the command-line version of the network traffic analyzer tool Ethereal. Like TCPdump, it also uses the packet capture library (libpcap). Aside from network traffic analysis, Tethereal also provides facilities for decoding packets.

New Member

Re: WAAS - TCPDUMP Issue

Are you able to apply a post capture filter on WAAS box that's running WCCP GRE to the router ??? If so, what is the syntax to perform this? It only works if you don't do a pre capture filter, you're able to see both sides of the conversation.

711
Views
0
Helpful
2
Replies