WAAS - WAE-512-K9 - SATA2 250 GB Hard disk not detecting
We had installed new WAE-512-K9 having 2*SATA2 250GB Hard disk as edge box in one of the branch. But during configuration, we have notified that both the hard disks are not getting detected. Both the disks 00 & 01 are inserted in the respective slots as mentioned in the cisco document. Hard disk LEDs are glowing intially when the device boots up, but later there is no LED indication. Please help me in resolving this issue.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...