Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WAAS - WCCP redirect inbound

Hello Everyone,

I notice on our 1841 router running version 12.4(22)T, the wccp redirect inbound method does not process through CEF. It will only process it through an outbound redirection. The 61 redirect inbound is applied to the subinterface on fas 0/0.

Any ideas ?

interface FastEthernet0/0.999

description ****Dublin User Vlan****

encapsulation dot1Q 999 native

ip address x.x.x.x

ip helper-address

no ip redirects

no ip proxy-arp

ip wccp 61 redirect in

ip wccp 62 redirect out

ip flow ingress

no ip mroute-cache

service-policy input DBN_LAN


Re: WAAS - WCCP redirect inbound

You must configure these devices to use WCCP Version 2 instead of WCCP Version 1 because WCCP Version 1 supports web traffic (port 80) only. When you enable the TCP promiscuous mode service (WCCP Version 2 services 61 and 62) on a WAE and a router, you do not need to enable the CIFS caching service (WCCP Version 2 service 89) on the router or WAE.