Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

WAE 512 Disk Install

Hi,

I ordered an extra disk for a 512 with a single disk installed. Is there a procedure for installing the new disk and getting the Raid 1 built or can I power the WAE down install the disk power it on and watch it build the Raid?

Thanks,

Mike

  • Application Networking
3 REPLIES
Cisco Employee
Bronze

Re: WAE 512 Disk Install

Thanks Dan,

The only item it does not mention in the doc is the Raid configuration. Is the Raid already configured by default...remember I'm adding the second drive...it currently has been running and was purchased from Cisco with a single disk. According to TAC it's as easy as powering down the WAE, installing the new disk, powering on the WAE and watching it build the Raid. I should have the disks at the locations next week so I'll let you know how it goes.

Thanks again,

Mike

Cisco Employee

Re: WAE 512 Disk Install

Mike,

The RAID configuration is automatic. All you have to do is add the second disk.

Zach

199
Views
0
Helpful
3
Replies