Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WAE612 ACNS Deployment problems


I recently installed WAE612 with ACNS (Version: ce612- and 2x300Gb HDD. Since the very beginning I have several problems.

1) Having 600GB of space I can use only 65GB of CFS! Even if i specify 200Gb or something and then reload - after restart I see 65535Mb of CFS. Why??

2) I deployed web-cache and https-cache with IP spoofing. For spoofing I made two processes:

wccp service-number 95 router-list-num 1 port-list-num 1 application cache hash-source-ip match-source-port password ****

wccp service-number 96 router-list-num 1 port-list-num 2 application https-cache hash-source-ip match-source-port password ****

First one is working nice. But the second - no. I see WAE's source IP while trying to access to https pages. I guess router configured well:

interface GigabitEthernet0/2

description to LAN

ip address

ip wccp web-cache redirect in

ip wccp 70 redirect in

ip wccp 95 redirect out

ip wccp 96 redirect out

ip route-cache flow

load-interval 30

duplex auto

speed auto

media-type rj45

negotiation auto

No idea and no information on Internet...

3) The major! I do not see any significant savings of traffic. I supposed traffic to LAN will be higher then from Internet. Actually what do I see - traffic from Internet is usually higher (or the same). Savings that are displayed by WAE612 - 2%. But I do not see it on MRTG graph. 18GB is cached so far. No pre-load is activated. But WAE loads from Internet more data then gives to LAN...

Any comments are appreciated. Thanks in advance.