11-05-2008 12:50 PM
I've read the firewall administrator's guide and I'm still not sure that I know how to get the WAF to answer for multiple ip addresses. For example, if I want the following to happen:
192.168.1.101:80 (WAF) -> 172.16.1.1 (Backend server)
192.168.1.102:443 (WAF) -> 172.16.1.2 (Backend server)
Are those 2 ip addresses configured from the console on the WAF? Does anyone have any insight about how to configure the WAF to redirect for multiple ip addresses?
Thank you,
Jim
Solved! Go to Solution.
11-17-2008 10:11 AM
You need to first configure the additional IP addresses using the console (SSH or video), then configure the policy to accept those IP addresses using the Manager. For more information on doing the console configuration, please see:
11-17-2008 10:11 AM
You need to first configure the additional IP addresses using the console (SSH or video), then configure the policy to accept those IP addresses using the Manager. For more information on doing the console configuration, please see:
11-17-2008 12:43 PM
Thank you, this did the trick and was very straightforward. Only thing to add is that the order is important. I put in the rules through the manager first and when deploying it the Reactor process shutdown. Lesson learned - I'll always put in the ip address through the console first.
Thanks for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide