When I set up the File Servers for my core and edge WAE's I understand that this will provide CIFS acceleration - in addition to the TFO/DRE/LZ features. Does this CIFS acceleration only provide benefits for file shares - or would it also provide some benefit for the logon process w/ roaming profiles?
If your roaming profiles are on a server that isn't using SMB Signing, then the CIFS/WAFS adapter can provide CIFS acceleration. However, usually the profiles reside on a Domain Controller, which has SMB Signing turned on by default, and as a result, most of the profile traffic, even though it's CIFS, gets punted outside the CIFS adapter.
In most cases I've seen the DC's store the configuration info (location) of the roaming profiles and then the actual user profiles are stored on a file server. If this is the case would CIFS acceleration 'kick in' during the logon process?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...