Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

wccp spoof-client-ip enable

Hi

I am using CE 570.

Now I have to use this command.

But it does not support this command

wccp spoof-client-ip enable.

Here is some output of sh tech-support.

opyright (c) 1986-2001 by Cisco Systems, Inc.

Software Release: CE ver 2.51 (Build: FCS 05/24/01)

Compiled: 15:00:20 May 24 2001 by bbalagot

Image text-base 0x108000, data_base 0x4424c4

Cisco Cache Engine CE570 with CPU AMD-K6 (model 9) (rev. 1) AuthenticAMD

2 Ethernet/IEEE 802.3 interfaces

1 Console interface.

268431360 bytes of Physical Memory

131072 bytes of ROM memory.

8388608 bytes of flash memory.

List of disk drives:

/c0t0d0 (scsi bus 0, unit 0, lun 0)

/c0t1d0 (scsi bus 0, unit 1, lun 0)

Can anyone please suggest me what I have to do

Please help me.

Ishwar

1 REPLY
New Member

Re: wccp spoof-client-ip enable

The 570 is the original caching platform and does not support ACNS (Application and Content

Networking Software) which is require for ip spoofing.

You will need to migrate you cache hardware to CE-510A-K9 or CE-565-K9.

There is no developement being done on the 2.5.1 train of code as the products that run this code are now and have been for a while end of sale.

110
Views
5
Helpful
1
Replies