Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wccp v2 on a Cisco 6513 and Squid

I have a cisco 6513 configured to use wccp v2 with a RedHat AS5 server running Squid 2.6 using L2 redirection. On the squid server I have defined the wccpv2 router and set the assignment to "mask". ON the 6513 I have applied the following commands...

ip wccp web-cache

ip wccp version 2

ip wccp web-cache redirect-list 110 group-list 10

(under the inside vlan interface I used the following command)

ip wccp web-cache redirect in

They seem to see each other judging by the debug output...

--- debug clip ---

Aug 7 20:02:12 UTC: WCCP-EVNT:S00: Here_I_Am packet from 10.184.196.241 w/bad rcv_id 00000000

Aug 7 20:02:12 UTC: WCCP-PKT:S00: Sending I_See_You packet to 10.184.196.241 w/ rcv_id 000143AE

Aug 7 20:02:17 UTC: WCCP-PKT:S00: Sending Removal_Query packet to 10.184.196.241w/ rcv_id 000143AF

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_change_router_view: S00

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_change_router_view: deallocate rtr_view (24 bytes)

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_change_router_view: allocate hash rtr_view (1560 bytes)

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_change_router_view: rtr_view_size set to 24 bytes

Aug 7 20:02:22 UTC: WCCP-EVNT:S00: Built new router view: 0 routers, 0 usable web caches, change # 000050DD

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_copy_wc_assignment_data: enter

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_copy_wc_assignment_data: allocate orig mask info (28 bytes)

Aug 7 20:02:22 UTC: WCCP-EVNT:wccp_copy_wc_assignment_data: exit

--- debug clip ---

It is not working however and the only apparent error is the "bad rcv_id" sent by the squid server.

What am I missing?

The IOS on the router is 12.2(18)SXF6 (s72033-ipservicesk9-mz.122-18.SXF6.bin)

_________________

Jason Fox

maadog@gmail.com

1 REPLY
Silver

Re: wccp v2 on a Cisco 6513 and Squid

To display WAE WCCP statistics, use the show statistics wccp EXEC command.

show statistics wccp gre

GRE Displays WCCP generic routing encapsulation packet-related statistics.

526
Views
1
Helpful
1
Replies