Roosevelt-2801(config)#do sh ip wccp web Global WCCP information: Router information: Router Identifier: 12.x.x.98 Protocol Version: 2.0
Service Identifier: web-cache Number of Service Group Clients: 1 Number of Service Group Routers: 1 Total Packets s/w Redirected: 7800 Process: 94 CEF: 7706 Service mode: Open Service Access-list: -none- Total Packets Dropped Closed: 0 Redirect Access-list: 46 Total Packets Denied Redirect: 8195426 Total Packets Unassigned: 0 Group Access-list: 40 Total Messages Denied to Group: 14 Total Authentication failures: 8 Total Bypassed Packets Received: 0
Yes from the cache logs, and the stratacache engineer can see whether traffic is flowing. If we set the cache box up as a forward cache on 8080 and set the proxy in the browser you can see the hits, but not with wccp redirect. Traffic shows redirected on the router but the cache never seems to see it.
Does the router identifier matter? I noticed the router shows the ip of the multilink1 interface instead of the FE0/0 interface.
so I found the problem... hopefully this helps somebody else in the future... the problem is the redirected packets were sourced from the router multilink1 interface IP address and the cache was expecting them from the router fa0/0 interface, so it dropped them.
also the cache has a "spoof client IP" option that was on, because we prefer to do this for netflow, but, I don't think client-IP-spoofing works with the standard web-cache wccp service. It was causing internet problems so I turned the spoofing off and it works fine...
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...