WCCP is the communication protocol between a router and CEs, the devices use this protocol to tell each other, who they are and if they are available.
To use WCCP, it has to be configured on both sites (router and CE).
If you configure WCCP at a router, the router is able to redirect webtraffic (i.e. port 80) to the CEs. The CE takes the request and answer it like a cach. If the SE knows the requested content it will fulfill the request.
The benefit here is, that you can make transparent caching without making any changes at server site and at user site and you can build a "cluster"of CEs, where you can add and remove the devices without impact to the users.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...