Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

What happen when SSL daughter card fails?

I'm using two CSM with SSL duaghter card with redundancy.

What happen if the card fails? CSM fails too?

Thanks.

Andrea

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: What happen when SSL daughter card fails?

The CSM will most of the time fail as well.

Gilles.

3 REPLIES
Silver

Re: What happen when SSL daughter card fails?

When the SSL daughter card failure is detected, the SSL daughter card is restarted causing all SSL flows to fail, and they will need to be re-established.

During a supervisor engine switch over, the standby CSM-S fails to initialize and the new standby supervisor engine prints the following message for all CSM-S ports:

%PM-STDBY-4-INT_FAILUP:GigabitEthernet7/2 failed to come up.No internal VLAN available

New Member

Re: What happen when SSL daughter card fails?

Thanks.

But I don't understand if when SSL card fails, CSM fails too; so active CSM becomes standby.

Regards.

Andrea

Cisco Employee

Re: What happen when SSL daughter card fails?

The CSM will most of the time fail as well.

Gilles.

150
Views
0
Helpful
3
Replies
CreatePlease to create content