Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

what's wrong with my 7320?

My 7320 is halt. Can anybody give me some suggestion?

Thank you very much!

"

Boot info:

"Embedded services management firmware:5.22

.....................................:5.35

.....................................:5.32

(firmware out of date)

.

.

.

.

D0 ScanDisk SDP3B-128 Normal 122MB PIO 1

D1 not detected

D2 not detected

D3 not detected

IDE BUS Master Enable

CSCO

.

dbgrub_Start.S

Uncompressing Linux..

ran out of input data

--system halted.

"

  • Application Networking
5 REPLIES
Bronze

Re: what's wrong with my 7320?

Hi,

Are you seeing this output on a pc monitor ? Is the console connected to the box because at some point the output on a 7320 switches over from the PC monitor connection to the Cisco standard console connection.

Pete..

New Member

Re: what's wrong with my 7320?

Pete,

Thanks so much!

Following your suggestion, we showed some info using console.We entered '***' to rescue the system image.The Linux uncompressing is ok.But system still need a new system image.How can we get the new ACNS 4.1.1(for 7320)system image?Please tell me more .

Regards,

Sha

Bronze

Re: what's wrong with my 7320?

Sha,

Depending on what version is currently on the 7320, these two links have the software you are looking for:

http://www.cisco.com/cgi-bin/tablebuild.pl/uce42-3des

or

http://www.cisco.com/cgi-bin/tablebuild.pl/uce42

Regards

Pete..

New Member

Re: what's wrong with my 7320?

Pete,

Actually I have one ACNS 4.1.1 system iamge in one CE7320.But I do not know how to download it from CE7320 to my pc.You can tell me how to get it from CE7320 or give me detailed place to download it.

System image name maybe ce7320-ACNS-4.1.x-K9.bin.

Thank you very much!

Regards,

Sha

New Member

Re: what's wrong with my 7320?

Pete,

Actually I have one ACNS 4.1.1 system iamge in one CE7320.But I do not know how to download it from CE7320 to my pc.You can tell me how to get it from CE7320 or give me detailed place to download it.

System image name maybe ce7320-ACNS-4.1.x-K9.bin.

Thank you very much!

Regards,

Sha

239
Views
5
Helpful
5
Replies