WILL CSS HELP ENABLE PRIORITISING TRAFFIC TO PRIMARY SET OF SERVERS.
Kindly help me how to achive the below.I have a CSS11501 in HA.Am doing inbound loadbalancing between 4 servers(2 in Chennai,India and 2 in Hyderabad,India).Kindly let me know if i can prioritise the loadbalncing to happen only between the 2 servers available in Chennai, and when the Chennai servers fail, the traffic should be loadbalanced between the servers in Hyderabad.
If you do one ACL for each content rule and specify your servers that you want the traffic to go to first then you can control traffic from going to your secondary site. one caveat: when you do this ALL traffic goes to the primary. when it fails the traffic shifts to the secondary, then when/if it fails the traffic will be load balanced across the servers listed in your content rule.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...