We have a Fasthub 400 series (WS-C412) hub (refurbished I think). One of our application broadcasts some data that's supposed to appear on a monitor on another PC. It doesn't. It makes us think that WS-C412 is suppressing broadcasts. We do a ping from one of the PCs (there are 4 PCs and 5 LANs. All HUBs are WS-C412) and watch the lights on the HUB and it doesn't look like the PING is broadcast at all (although we don't care about the PING, we do care about HUB suppressing broadcast messages because we need broadcasting capability in other applications). We have a 3COM HUB in another setup and there are no such problems there.
I was wondering if there is some configuration that would allow us to enable broadcasting. I would appreciate anyone's assistance.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...