In our topology we try to use two csm-s module on different 6509 chasis. In our network we use hsrp configuration, so csm-s module's running as active-passive.
According to cisco documents, we couldnt be able to pass clients vlan on load balancer configuration between two chasis trunks port. Also according to same documents we configured fault tolerance vlan on 6500 switches.
But for server ethernet redundancy we configured teaming ethernet interface on the servers and finalized on different 6500 switches. So when the ethernet port on active backbone is plug off, because of trunk port vlan restiriction , we couldnt reach servers behind load balancer.
We want to know if there is another solution for this csm-s configuration. Could we use active-active envionment ?
Must we exclude client vlans on load balancer configuration on trunks port between two 6500 chasis ?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...