Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Spam and Virus Blocker Alert

Hello

My Blocker has generate this message:

"Subject: Warning <Hardware> : RAID ALERT: RAID disk 0:

WARNING - SETFEATURES SET TRANSFER ...

The Warning message is:

A RAID-event has occurred:

RAID disk 0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly RAID disk 0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly RAID disk 0: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly RAID disk 0: WARNING - SETFEATURES DISABLE WCACHE taskqueue timeout - completing request directly RAID disk 0: WARNING - SET_MULTI taskqueue timeout - completing request directly RAID disk 0: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=103557055"

Is it mean, that one of drives is in bad condition?

Thanks for help.

Sory for my english

1 REPLY
New Member

Re: Cisco Spam and Virus Blocker Alert

That warning is usally a sign that the dis is going bad. I would recommend that you contact Cisco SMall Business support Center and open a ticket and have it replaced.

http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html#csb

Brian

1096
Views
0
Helpful
1
Replies