Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure Automatic Updates on the RV34x Series Router

Objective

It is important to keep your devices up to date with the latest firmware or bug fixes to keep the network running smoothly. The router can be configured to update firmware and security signatures during a specific time of the day or immediately as soon as it is available. Set the router to check on a weekly or monthly basis in order to run a scheduled maintenance for the network.

This article aims to show you how to configure the router to have automatic updates on the RV34x Series Routers.

Applicable Devices

  • RV34x Series

Software Version

  • 1.0.00.33

Configure Automatic Updates

Step 1. Log in to the web-based utility and choose System Configuration > Automatic Updates.

Step 2. From the Check Every drop-down list, choose how often the router should check for updates. The options are Never, Week, and Month.

Step 3. In the Notify via area, check the Email to check box to receive updates through email. Admin GUI check box is enabled by default and cannot be disabled. A notification will appear in the web-based configuration once an update is available.

Note: If email server settings have not yet been configured, click here for to learn how.

Step 4. Enter an email address in the Email to address field. In this example, ccoesup@gmail.com is used.

Note: It is highly recommended to use a separate email account instead of using your personal email to maintain privacy.

Step 5. Under the Automatically Update area, check the Notify check boxes of the kind of updates you want to be notified about. The options are:

  • System Firmware — The main control program for the device.
  • USB Modem Firmware — The control program or driver for the USB port.
  • Security Signature — This will contain signatures for Application Control to identify applications, device types, operating systems, and so on.

Note: For this example, all check boxes are checked.

Step 6. From the Update drop-down list, choose a time of the day you want the automatic update to be done. Some options may vary according to the type of update you have chosen. Security Signature is the only option to have an immediate update option.

Note: For this example, Security Signature is set to be updated Immediately.

Note: The Status displays the current running version of the firmware or security signature.

Step 7. Click Apply.

Step 8. (Optional) To save the configuration permanently, go to the Copy/Save Configuration page or click the icon at the upper portion of the page.

You should now have successfully configured the Automatic Updates feature on your RV34x Series Router.

 

13
Views
0
Helpful
0
Comments