Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Product Specifications of the WAP361 Wireless-AC N Dual Radio Wall Plate Access Point with PoE

Objective

The WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE uses concurrent dual-band radio for improved coverage and user capacity. Gigabit Ethernet LAN interfaces with Power over Ethernet (PoE) facilitate flexible installation and reduce cabling and wiring costs.

To provide highly secure guest access to visitors and other users, WAP361 supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. Configure a cluster of WAPs for seamless roaming within a campus and manage them with through a single IP address.

This article explains the product specifications of the WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE.

Note: To know more about the WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE, click here.

Product Specifications

Specifications Description
Cabling type Category 5e or better
Antennas Internal antennas optimized for installation on a wall
Operating System Linux

Physical Interfaces

Specifications Description
Ports 5 - 10/100/1000 Ethernet, with support for 802.3at. PoE support is only for one port and not five ports.
Buttons Reset button
LEDs One multi-function LED
Mounting and Physical Security
Multiple Mounting Options Mounting bracket included for easy ceiling or wall mounting
Physical Specifications
Physical dimensions
(W x D x H)
6.5 x 4.33 x 1.8 in. (165 x 110 x 45.75 mm)
Weight 1.06 lb or 480 g

Network Capabilities

Specifications
Description
VLAN Support 1 management VLAN plus 16 VLANs for SSIDs (per radio)
Number of VLANs Yes
802.1X supplicant Yes
SSID-to-VLAN mapping Yes
Auto-channel selection Yes
Spanning tree Yes
Load balancing Yes
IPv6
Yes
IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP)
Layer 2 802.1Q-based VLANs, 32 active VLANs plus one management VLAN

Security

Specifications Description
WPA, WPA2 Yes, including Enterprise authentication
Access control Yes, management access control list (ACL) plus MAC ACL
Secure management HTTPS
Rogue access point detection Yes

Performance

Specifications Description
Wireless throughput Up to 1.2 Gbps data rate (real-world throughput will vary)
Recommended user support Up to 128 connective users, 32 active users per radio
Multiple-Access Point Management
Single Point Setup Yes
Number of access points per cluster 8
Active clients per cluster 240
Management
Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management Yes
Event logging Local, remote syslog, email alerts
Network diagnostics Logging and packet capture
Web firmware upgrade Firmware upgradable through web browser, imported and exported configuration file
Dynamic Host Configuration Protocol (DHCP) DHCP Client
IPv6 host Yes
HTTP redirect Yes
Wireless
Frequency Dual Concurrent radios (2.4 GHz and 5 GHz)
Radio and modulation type
Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11 a/n: OFDM(BPSK/QPSK/16QAM/64QAM/256AM)
IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM)
WLAN
802.11n/ac
2x2 MIMO with 2 spatial streams at 5 GHz
2x2 MIMO with 2 spatial streams at 2.4 GHz
20-, 40-, and 80-Mhz channels for 802.11ac
20- and 40-Mhz for 802.11n
PHY data rate up to 1.2 Gbps
802.11 Dynamic Frequency Selection (DFS)
Data rates supported
802.11a/b/g:
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
802.11n: 6.5 to 300 Mbps:
20-MHz bandwidth: MCS 0-15 for supported data rates
40-MHz bandwidth: MCS 0-15 for supported data rates
802.11ac: 6.5 to 867 Mbps:
20-MHz bandwidth: MCS 0-9 for supported data rates
40-MHz bandwidth: MCS 0-9 for supported data rates
80-MHz bandwidth: MCS 0-9 for supported data rates
Transmitter output power 2.4 GHz, 5 GHz
System memory
256 MB RAM
128 MB flash

 

Version history
Revision #:
1 of 1
Last update:
‎03-29-2017 06:38 PM