Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

The log partition is at 99% capacity

Solution: You can reinitialize the tracking DB

- Open an SSH session

launch the following command

- "diagnostic"

- "tracking"

- "deletedb" command will reinitialize de DB

2 REPLIES
Silver

The log partition is at 99% capacity

philip,

This will defiantly bring your log partition size down. You still want to monitor after running these command to see if your log partition starts filling back up. logs really should stay about the same for a good length of time increasing slowly. If size starts growing rapidly again then database corruption can't be fixed and unit will have to be replaced.

Thanks,

Jason

Cisco Support Engineer

.:|:.:|:.

The log partition is at 99% capacity

Hello Philippe,

in addition to what Jason already stated, a running tcpdump (CLI: diagnostic -> network -> tcpdump, GUI (7.x only): Help and Support -> Packet Capture) can also easily fill up the log partition.

Thanks and regards,

Martin

3962
Views
0
Helpful
2
Replies
CreatePlease to create content