I have followed the SPA2102 Administration Guide Section 5 regarding configuring the internal music on hold, however, I am unable to get any sound when I put a call on hold. Perhaps I do not know the proper way to place a call on hold for this ATA? - I am just using the Flash button.
I have the latest firmware (5.2.5). I have the MOH server for the line set to imusic.
Can you describe a bit more your setup. What is the SIP server serving the SPA2102? The SPA2102 does not have a music on hold server, it relies on an external server which can be on the network or on a FXS port, but it is not internal.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...