Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ATA model question

Good evening!

We have a customer with an Avaya IP Office that needs ATA devices in order to connect some analog end devices. We need to know if there is a CISCO ATA model with just one port.

We have taken a look and have seen the ATA SPA112 but it has two ports. We could propose this model but in order to connect to the IP Office, each port of the SPA112 needs to be configured with a different IP address. Is that possible?

Any help?

Best regards,

Sara Martinez

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Gold

ATA model question

We need to know if there is a CISCO ATA model with just one port. ... 

each port of the SPA112 needs to be configured with a different IP address. Is that possible?

As far as I know, no (answer to both question). But you can use SPA112's first line only considering the second line is just not here.

Of course, unless you are interested in features unique to Cisco products you may consider other vendor's.

2 REPLIES
VIP Gold

ATA model question

We need to know if there is a CISCO ATA model with just one port. ... 

each port of the SPA112 needs to be configured with a different IP address. Is that possible?

As far as I know, no (answer to both question). But you can use SPA112's first line only considering the second line is just not here.

Of course, unless you are interested in features unique to Cisco products you may consider other vendor's.

New Member

ATA model question

Thanks Dan!

737
Views
0
Helpful
2
Replies