We just upgraded our phone system but need to tie into an overhead paging system and the phone company provided an ATA SPA232D for this purpose and we have it tied to an extension.
Works great for the first call but when hang up the phone after making an announcement the ATA remains off-hook and no further announcements can be made. Playing with various tones, polarity, and debug, the ATA is receiving the reorder when the call is terminated from the VOIP phone but does not go back on hook.
Paging system is a Valcom V-2000a.
Ayone have any ideas on congiruring the ATA that would help?
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
This document is a must-read for all SPA232D installers, administrators,
and users. The document takes you from unboxing the SPA232D ATA and
SPA302D DECT handsets, through DECT handset registration, and connecting
to the PSTN and ITSP.The document describ...