Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Basic setup for SPA3102

Hi, I've got this information from my ISP for using with VOIP but I am not really sure where to configure it on the SPA3102:

SIP-username

SIP-password

SIP-Server

Voicemail

Username

Password

Thanks in advance!

/Daniel

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Basic setup for SPA3102

If you have your PC plugged into the yellow Ethernet port on the SPA3102, then you will need to access the device's interface by going to: http://192.168.0.1/admin/voice/advanced/

Once the GUI loads:

-Click on the "Line 1" tab.

-Scroll down until you see "Proxy and Registration" and "Subscriber Information"

That should do it.

2 REPLIES
New Member

Re: Basic setup for SPA3102

If you have your PC plugged into the yellow Ethernet port on the SPA3102, then you will need to access the device's interface by going to: http://192.168.0.1/admin/voice/advanced/

Once the GUI loads:

-Click on the "Line 1" tab.

-Scroll down until you see "Proxy and Registration" and "Subscriber Information"

That should do it.

New Member

Re: Basic setup for SPA3102

Thanks, I thought that was the place to change the settings but it feels better to getting it confirmed :).

1153
Views
0
Helpful
2
Replies