I'm about to retire an old server running Windows 2008 R2. This machine acts as a secondary DNS server for the domain. While technically I don't need two DNS servers, it is good practice to have a fall back in case the primary DNS server (i.e. the Do...
Hi, In the latest version of the Cisco IP Desk Phone with Multiplatform Firmware Administration Guide, the documentation regarding the preserve-value attribute is incorrect: The ua attribute, if present, must have one of the following values: na—No a...
HelloI'm trying to set up VLAN's but can't get it working.I have these components- firewall Cisco RV042G- Switch Cisco CBS220What I would like to create is three separate VLAN's with192.168.1.1 (my default LAN)vlan-2 192.168.2.1..vlan-3 192.168.3.1....
Hello Cisco Community,Starting today, I've seen this log message appearing a lot in my logs. From what I've read, it's either a duplicate MAC address or a loop in the network. We have checked for loops and we didn't find any. And this can't be a dupl...
Buen dia.Necesito configurar 2 VLANS en 1 router cisco SG350-10, con asignandoles 2 rangos de ips a las vlan, en modo GUI.Si alguien tiene informacion.
Our company bought some Cisco hardware long ago. This router in question we want to start using again after not being used for almost 10+ years. I want to reflash the os on it with the original c2800nm-ipbase-mz.150-1.M5.bin that it came with and pra...
In Cisco 9200L-24p can see that ports are connnected to PD (cameras)and power is allocated also..port status is "not connected" and cameras aren't responding
Please, I am looking for Cisco small business router with the following specs- At least 1 SFP WAN port- At least 6 LAN Gigabit ports- Monitoring features (Internet service)Thank you,
I enabled SNR on a users line. Works fine.Customer does not like that other phones show the option under CME Services URL>My Phone APPS> Single Number Reach, even when the phone line is not programmed to allow SNR. Is the SNR option something that ...
Hello all,I have an issue that is very similar to this https://community.cisco.com/t5/switches-small-business/sg300-issues-with-routes/m-p/2538028#M13074Basically, I am trying to add redundant default gateways, but only one route will be active. Both...
We had some time ago problems after the firmware update to 1.0.4.3. Frequently several time a week some of the 22 WAP125 access points either had poor network throughput, or were not reachable by wifi or lan (but the SSID was still shown). A hard reb...
Hi There,we now have 2 of these devices in our company and both behave the same.DHCP leases will not be deleted automatically. So we are ending up full of expired leasees until no receives a new IP.Another issue is that also both switches are not ava...
Hello all, the dental office has the router RV042G. It does not have the wireless feature. I would like to set up wireless for this office. However, I am not sure which device is good for this environment. I had picked the WAP371 but it did not work....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: