I have a SPA3102 connected PTP with a telephone IP. The SPA converts a PSTN line (in Brazil) to SIP.
I'm having a problem with the Caller ID. When anybody calls to me the number that shows in my telephone IP has the first number incorrect. Example: my cell phone number is 031 1234-5678. When I call to the PSTN line the number that appears is 23112345678. This number "2" is incorrect. Should appear the number 0 .
In "Caller ID Method" on Regional configurations I'm using DTMF(Finland, Sweden). Already I tried change the configuration but without sucess.
Article ID:1966 Network Address Translation (NAT) Settings for Lines on
PAP2T and SPA3102 Phone Adapters Objective The objective of this
document is to configure Network Address Translation (NAT) settings for
the lines of communication on the PAP2T and SP...
Article ID:2742 Speed Dial Settings on SPA100 Series Objective Speed
Dial Buttons are often used to make the process of calling regularly
used contacts quicker and with one button. This option is used in place
of dialing the entire phone number in. This h...
Article ID:2676 Firmware Upgrade on SPA112 and SPA122 Objective To
upgrade the firmware a specific file must be downloaded from the
Internet and uploaded to the device. Upgrading your devices can be very
useful. Firmware upgrades can fix software bugs, im...