Is there any way to change the Customization level on a SPA112? Recently purchased one for testing purposes. Just realized the Customization level is set to Open, which, if I understand things correctly, means it will ignore anything put in the Profile_Rule fields and will not pick up configuration files. If this is the case, would explain why the device seems to be ignoring whatever we put in the Profile_Rule fields. Can someone a) confirm my suspicion and b) tell me if there is a way to change the Customization level so we can remotely configure it. Thanks!
Looks like the problem was with DHCP. When we statically set the IP, it started recognizing the files. We had not set anything explicit for DHCP, so a little puzzling why this was the problem. Moving on, is there a more developer oriented guide to creating a configuration file? The Admin guide is really oriented to the Web Interface and does not always appear to have a valid value list by parameter. Thanks.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...