cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1406
Views
0
Helpful
2
Replies

CID Problem with SPA8800

Hello.

I'm from Paraguay and I need assistance with SPA8800 voip gateway.

My problem is I don't recieve CID

I am sure that the PSTN line send the CID of the caller.

The SPA is conected  through SIP tunk to a asterisk server.

This is the log of the SPA

Jan  4 11:41:42 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.12:5060(976)

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.12:5060(976)

a=sendrecv 0-15lephone-event/800096 97 98 100 101TIONS, REFER

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(439)

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(439)

Content-Length: 00@10.32.1.10:5060>, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISHt=5161

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(682)

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(682)

a=sendrecv PCMA/8000P 0 88 IN IP4 10.32.1.10FER, SUBSCRIBE, NOTIFY, INFO, PUBLISHt=5161

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.10:5060(347)

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.10:5060(347)

Content-Length: 0/SPA8800-6.1.7(GW)1.20875o14bK-970797a5IP/2.0

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:41 10.32.1.13 M1: [1]->10.32.1.10:5060(315)

Jan  4 11:42:41 10.32.1.13 M1: [1]->10.32.1.10:5060(315)

Content-Length: 0/SPA8800-6.1.7(GW)1.20875o14bK-a56ebb83IP/2.0

Jan  4 11:42:41 10.32.1.13 M1:

Jan  4 11:42:41 10.32.1.13 M1:

Jan  4 11:42:41 10.32.1.13 M1: [1]<<10.32.1.10:5060(410)

Jan  4 11:42:41 10.32.1.13 M1: [1]<<10.32.1.10:5060(410)

Content-Length: 0es, timer, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISHt=5161

Jan  4 11:42:41 10.32.1.13 M1:

Max

2 Replies 2

Alberto Montilla
Cisco Employee
Cisco Employee

Hola Maximo;

This forum is for SPA9000. I suggest you move the question to the ATA forum which is the appropriate one.

Regards;

Alberto

Thanks Alberto.

Can anybody help me with this problem?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: