thanks for the reply. I already have a simple "server". It is basically a virtual pbx called VOHIPPO and I use two standard phones linked to the CISCO ATA 122. Everything works and is enought for what I do with my small business. The reason why I both the 2 Cisco 7861 is that the price was really good and I wanted a better communication and also wanted to use jabra pro 9470.
So what I have done is have inserted provided data into the virtual pbx and then the user and psw given fm the virtual pbx into the CISCO ATA 122.
Everything works but I want to improve quality of audio.
Therefore my question is, can I insert user and psw given by my vohippo virtual pbx into the cisco phones?
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...