I am trying to configure an SPA3102 for Ukraine, but coming up quite empty in tracking down what the various tones are. If any reader happens to know the dial, ring, busy, and/or reorder tone, please post.
Additionally, if anyone can point me to some documentation that contains this information I would greatly appreciate it; note, I have already checked
Annex to ITU OB 781-E, there are no entries for Ukraine in there.
In case you can't figure out what the correct settings are by looking at documentation you could always use asterisk's record functionality (provided you use asterisk that is) and analyze the audio files in audacity (audacity.sourceforge.net). It worked for me, at least for tones you can record (such as disconnect tone, or busy tone etc).
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...