I ordered a new PAP2T on eBay, which arrived today. I noticed that the MAC address has a prefix of "00:0F:18", which maps to "Industrial Control Systems", not Linksys or Cisco. Can anyone confirm whether or not this device is likely to be a counterfeit, and recommend what I should do if it is?
Product Name: PAP2T
Serial Number: FE186E006050
Software Version: 5.1.6(LS)
Hardware Version: 0.1.5
MAC Address: 000F18606050
Client Certificate: Installed
I also find it odd that the serial number and MAC address have the same suffix. Other ATAs I can find have a MACs/serials which seem uncorrelated:
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...