I'm trying to integrate the ATA's hookflash via SIP INFO with our Broadsoft platform but I'm running into an issue.
Broadsoft requires two things of the INFO message
1) Content type to be "application/broadsoft"
2) Event (body) to read "event hookflash"
I have been able to customize the content type via the "Hook flash MIME type" parameter (under the voice -> sip tab) but cannot see a way to modify the event body itself. It currently sends "signal=hf".
Is there a way to modify this behavior so that I can send something besides "signal=hf" in the event body?
Below is an example of the INFO message:
INFO sip:SD7hg63firstname.lastname@example.org:5060;transport=udp SIP/2.0
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...