We have a problem using a spa122 (or any cisco device) communicating with some IVRs over certain carriers. The carrier wants us to change the Marker Bits on the DTMF packets. Right now the first DTMF packet (for each keypres) has the marker bit set. They want to have the marker bit set on the first not-dtmf packet that is after the DTMF packets. They want to mimic the settings in a Polycom. Is there a setting that will allow the spa122 to do the set the marker bit?
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
This document is a must-read for all SPA232D installers, administrators,
and users. The document takes you from unboxing the SPA232D ATA and
SPA302D DECT handsets, through DECT handset registration, and connecting
to the PSTN and ITSP.The document describ...