I've configured a SPA3102 to work with a fax machine.
Now I wan't to test sending faxes.
The fax machine hooks up and I can hear the tone for a free line. The fax machine waits 3 to 4 seconds and starts to dail. But this seems to long for SPA-3102 because the free tone changes into a busy tone and the call isn't initiated. On the fax machine I found no possibility to shorten the wait time.
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
This document is a must-read for all SPA232D installers, administrators,
and users. The document takes you from unboxing the SPA232D ATA and
SPA302D DECT handsets, through DECT handset registration, and connecting
to the PSTN and ITSP.The document describ...
Save yourself hours or even days of searching for ATA resources by using
this document!Turn View Bookmarks on when viewing the document for best
navigation. [View > Navigation Panels > Bookmarks]Use the links in this
document to easily locate resources re...