I have 2 ATA SPA 112. The first one is connected to a router (master router) on the main building. Another router in another building is connected on the master one. This slave router serves a second ATA. I would like to use the 2 ATAs as an intercom, dialing a dedicating number.
I think I should tell the ATA to divert the call to FXO in case number XYZ is dialled, but I am not able to fill a dialplan. How could I carry out the desiderd function?
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
This document is a must-read for all SPA232D installers, administrators,
and users. The document takes you from unboxing the SPA232D ATA and
SPA302D DECT handsets, through DECT handset registration, and connecting
to the PSTN and ITSP.The document describ...
Save yourself hours or even days of searching for ATA resources by using
this document!Turn View Bookmarks on when viewing the document for best
navigation. [View > Navigation Panels > Bookmarks]Use the links in this
document to easily locate resources re...