Is there a guide, a how-to for connecting a Linksys SPA3102 with a Call Manager 7.x somewhere?
I'm connected to LINE 1 set to port 5060
Have been able to registered to call manager as a third party sip phone, can receive calls on the analog phone connected to line 1 but cannot figure out how to make it work for dialing out.
Everytime I get is a busy signal after dialing, I've played with the dial plan on the SPA3102, do I have to or is there a way to transfer all the intelligence to the call manager which has all our dialing rules already set up?
note: I'm pretty new to all the telephony gibberish, i'm surely missing something but the question is what!!
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
This document is a must-read for all SPA232D installers, administrators,
and users. The document takes you from unboxing the SPA232D ATA and
SPA302D DECT handsets, through DECT handset registration, and connecting
to the PSTN and ITSP.The document describ...
Save yourself hours or even days of searching for ATA resources by using
this document!Turn View Bookmarks on when viewing the document for best
navigation. [View > Navigation Panels > Bookmarks]Use the links in this
document to easily locate resources re...