i tried OB proxy line 3-4 doesnt register ITSP line 6 does register but when off hook blank even the led on line six deosnt flick
isnt there a way to disable nat mapping as i was using this same Spa8000 for past two years and it had all lines Nat mapping disabled suddenly after reboot the lines 3-8 are giving this prob as cant change nat mapping
Article ID:1966 Network Address Translation (NAT) Settings for Lines on
PAP2T and SPA3102 Phone Adapters Objective The objective of this
document is to configure Network Address Translation (NAT) settings for
the lines of communication on the PAP2T and SP...
Article ID:2742 Speed Dial Settings on SPA100 Series Objective Speed
Dial Buttons are often used to make the process of calling regularly
used contacts quicker and with one button. This option is used in place
of dialing the entire phone number in. This h...
Article ID:2676 Firmware Upgrade on SPA112 and SPA122 Objective To
upgrade the firmware a specific file must be downloaded from the
Internet and uploaded to the device. Upgrading your devices can be very
useful. Firmware upgrades can fix software bugs, im...