Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

No "Firmware Upgrade" in Admin menu

Hi,

I'm trying to upgrade my SPA112 and see no "Firmware Upgrade" in admin manu.Capture-1.png

Does it mean, device is broken?

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

No "Firmware Upgrade" in Admin menu

Try using another browser (I have the same problem with firefox).

4 REPLIES

No "Firmware Upgrade" in Admin menu

You can upgrade your SPA via provisioning in this way:

- provisioning must be on

- you must have a web server, ftp server or tftp server

Use this url to launch the upgrade procedure:

http://SPA_IP_ADDRESS/upgrade?http://YOUR_WEB_SERVER_ADDRESS/SPA_FIRMWARE.bin

http://SPA_IP_ADDRESS/upgrade?ftp://YOUR_FTP_SERVER_ADDRESS/SPA_FIRMWARE.bin

http://SPA_IP_ADDRESS/upgrade?tftp://YOUR_TFTP_SERVER_ADDRESS/SPA_FIRMWARE.bin

I use TFTP method with 3CDeamon.

Regards.

Cisco Employee

Re: No "Firmware Upgrade" in Admin menu

Hi Daniele,

This feature is not supported with the SPA1xx devices. [You are correct in that the other SPA family devices support upgrading in the manner described on the https://supportforums.cisco.com/docs/DOC-9941 page.]

The only two ways to upgrade firmware on the SPA1xx ATA devices are:

1. Using Internet Explorer (*not* Firefox) and the web-User Interface > Administration Tab > Firmware Upgrade:

snap0066.jpg

2. Using a configuration file with the upgrade rule populated:

 

  Yes

  30

  tftp://serverIpAddress/path/firmware.bin

   Note: you can use TFTP or HTTP to upgrade the firmware.

Regards,

Patrick

----------

Community Member

No "Firmware Upgrade" in Admin menu

Try using another browser (I have the same problem with firefox).

Community Member

No "Firmware Upgrade" in Admin menu

Thanks!

2000
Views
0
Helpful
4
Replies
CreatePlease to create content