Hello all,
I'm running a pap2t Firmware Version: 5.1.6(LS).
I am received calls fine, ring etc, but no caller id information at all, no number or names.
The call comes into asterisk and the pap2t is an extension.
I have played with Caller ID Method, Ring Waveform etc with no change.
Currently I have bellcore north america for the caller id method and bell 202 for Caller ID FSK ( tried both settings ).
Any suggestions would be appreciated...
Thanks
Firmware Version: 5.1.6(LS)
Firmware Version: 5.1.6(LS)