I'm trying to upgrade the firmware of a PAP2T v1 . Both, the versions 3.1.22-LS and 3.1.23-LS (md5 hashes below ) failed repeatedly with the error message "Upgrade Failed: Version not matching". I also checked the Web-GUI as advised in another thread, the upgrade definitely did _not_ happen.
Does anybody have an idea, what is going wrong here (and how to do it right ..) ?
Product Name:PAP2TSerial Number:FLI00J216194 Software Version:3.1.15(LS)Hardware Version:0.3.5 MAC Address:0021290CCBBFClient Certificate:Installed Customization:Open
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...