Are you asking about the syntax ? Well, you may read the documentation. Or you may save the configuration from configured device into file (either using /admin/config.xml URL or utilising SIP NOTIFY method) and use it as example/template
The following example is )mostly default) configuration of DECT 1 line. Most of parameters are same as for casual line.
for SPA301 and 302 no issues, i have provisioned it correctly, LINE number is directly equivalent with Extension number.
but since SPA232 has PSTN and Phone with 10 Lines, i have not tried reaching line 4 in xml file. i noticed line 1 is equivalent to Phone LINE. line 2 does not affect anyting and line 3 also not affecting anything.
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
This document is a must-read for all SPA232D installers, administrators,
and users. The document takes you from unboxing the SPA232D ATA and
SPA302D DECT handsets, through DECT handset registration, and connecting
to the PSTN and ITSP.The document describ...