Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Reg_Retry_Inverval etc do not work on all recent firmware if ...

Device does not get a reply to its Notify Keep alive


can easy be re produced  on 2102 (5.2.5) by truning on Notify for NAT keepalive and setting outbound proxy an IP  not send back ICMP errors

1/2 1 2 4, 4,4  second Register retry cycle is repeated every NAT Keepalive Interval , which in our case is 15 secs

3 REPLIES
Silver

Re: Reg_Retry_Inverval etc do not work on all recent firmware if

Hello,

What Cisco Small Business Product are your questions referring to?

Regards,

Cindy

Cisco Small Business Support

Community Manager

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!
New Member

Re: Reg_Retry_Inverval etc do not work on all recent firmware if

spa2102  spa942

Cisco Employee

Re: Reg_Retry_Inverval etc do not work on all recent firmware if

Hi FlyingDoctor,

Your initial description is somewhat terse. :-) Can you please provide a more detailed description so that it's easier to understand the issue that is being experienced?

How does the SPA942 fit into the issue? The problem is with a SPA2102, correct?

Please provide the config of the SPA2102: https://www.myciscocommunity.com/docs/DOC-5101

Regards,

Patrick

----------

1881
Views
0
Helpful
3
Replies
CreatePlease to create content