Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SIPURA (LINKSYS) SPA 3200

Hi ,

I have a little problem ever since i started to use spa 3200.I use this device with asterisk to dial out with outbound trunk. 

SPA3102 do this : when a call is placed for outgoing in asterisk and send to SPA3102 , this device “answer

the call immediately an a2bililing billed the call while ringing. why is that so. 


Sincerely ,
Dchetoora

3 REPLIES

The SPA3102 returns a signal

The SPA3102 returns a signal to the asterisk system that the call was answered when the SPA3102 answers the voip leg of the call.  For the outgoing analog call on the FXO port the SPA3102 does not receive any "answer supervision".  The SPA3102 does not know whether the analog line is answered or not. 

Community Member

Hi, thanks for your reply. 

Hi, thanks for your reply. 

 How do i configure the FXO port to receive answer supervision form the outgoing analog call, when call is  actually answer  then asterisk can billed when call is answered.

The PSTN does not give you

The PSTN does not give you answer supervision on an analog line so you can not configure to receive it.  The SPA3102 does not have a provision to "guess" that the call was answered.

 

 

163
Views
0
Helpful
3
Replies
CreatePlease to create content