Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco Employee

spa-2100 - upgrade failed

Hi Shintetsu,

Oops!  :-)

I deleted the attachment and the rest of the thread, including your request for firmware. I apologize.

The firmware attachment in the community appears to be faulty.

My local version of the firmware is good and can uncompress without error.

Please contact me at paborn at Cisco and I will send you the firmware.

Regards,

Patrick

----------

14 REPLIES
New Member

Re: spa-2100

Hi,

Thank you for your help.  I am not sure how can I contact with you at Cisco.  Please send me the latest firmware for spa-2100.

shintetsu

New Member

Re: spa-2100

Hi shintetsu,

What he meant was for you to send him an email at his email address: paborn @ cisco.com (without the spaces).

Thank you,

Cisco Moderation Team

New Member

Upgrade Failed: Version not matching

Dear Pat,

It won't take 3.3.14 firmware with the error: Upgrade Failed: Version not matching.  What is the latest firmware version for this paticular hardware version?

Software Version 3.3.9

Hardware Version 1.0.0 (4e16)

Product Name SPA-2100

Thank you.

Shintetsu

Cisco Employee

Re: Upgrade Failed: Version not matching

Hi Shintetsu,

Your device should be able to accept 3.3.14 without problems. Sometimes the upgrade utility reports a failure even when the device did upgrade. Please take a look at the Info page to check what version the device is running, don't forget to clear your browser's cache first, else you may be looking at old data.

If the device has not upgraded, please attempt the upgrade again.

Regards,

Patrick

----------

Cisco Employee

Re: Upgrade Failed: Version not matching

I sent the binary bin file to you so you can attempt the upgrade with a TFTP server instead of using the upgrade utility.

Hopefully, one of these upgrade methods will get your device upgraded.

Regards,

Patrick

----------

******** email contents for the sake of the community

I’ve attached the binary file for you to try.

You need a TFTP server to serve this file and then use a browser to request the upgrade as follows:

http://IPADDRESSofSPA/upgrade?tftp://TFTPADDRESS/SPAFILE.bin

For example: http://192.168.2.20/upgrade?tftp://192.168.2.100/spa2100-3-3-14.bin

where:

  • 192.168.2.20 is SPA2100
  • 192.168.2.100 is TFTP server

****** end of email contents

New Member

Upgrade Succeeded

Dear Pat,

After factory reset (IVR Menu 73738) and turn off windows firewall, upg-spa2100-3-3-14.exe file was able to upgrade the firmware from 3.3.9 to 3.3.14.  Thank you so much for your support.

Shintetsu

Cisco Employee

Re: Upgrade Succeeded

Hi Shintetsu,

I'm glad that you were able to successfully upgrade your SPA2100. Thanks for letting me know.

Regards,

Patrick

----------

New Member

Upgrade SPA2100

Hi, I also need to upgrade mine. Can you please send me the file?

Thanks

Cristine

Cisco Employee

Re: Upgrade SPA2100

Hi Cristine,

Contact me at paborn at Cisco.com and I'll send you the upgrade. I can't post it here because the attached file is always corrupted. :-(

Regards,

Patrick

-----------

New Member

Re: Upgrade SPA2100

I don't know why you say the file is always corrupt.  I was able to download from here and intall it without any problems.

You may want to post it again so people can download it.

Thanks for the help,

Mark

New Member

Re: Upgrade SPA2100

>I don't know why you say the file is always corrupt.  I was able to download from here and intall it without any problems.

>

>You may want to post it again so people can download it.

>

>Thanks for the help,

>Mark

yes, please do post. it can only work or not. :-) we'll be able to tell if the file is corrupt if, i assume, it is zip'd or similar.

thanks

freeman-a

Cisco Employee

Re: Upgrade SPA2100

Hi Mark,

Here you go, SPA2100_03-03-14.zip 1,916 kB compressed file containing the executable upgrade utility and the binary file. The binary file is only needed if you use a TFTP server to upgrade.

Regards,

Patrick

----------

Cisco Employee

Re: Upgrade SPA2100

I've just checked and this file is good and downloads and uncompresses without problem.

Regards,

Patrick

-----------

New Member

Re: Upgrade SPA2100

Where can we find the release notes for this firmware version (3.3.14) and previous ones?

Also, will there be any further firmware releases beyond 3.3.14 for the SPA2100, maintenance or otherwise?

Thanks.

3325
Views
0
Helpful
14
Replies