Most our clients have SPA 2102 boxes and we are using T38 protocol for faxing. Everything is OK, when faxing with speed 9600 , but the problem appears if another side supports only 4800 speed. For example, one my client wants send fax to B number. B side is connected over radio and supports 4800 fax speed for incoming and 9600 for outgoing. So what should I do? My SPA-2102 version is:
Software version: 5.2.10
Hardware version: 1.3.5(a)
Maybe somebody can advice which software version should I use to support 4800 speed?
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...